Published in Japan. Information regarding Lead-Free PbF solder:. Pb free solder has a higher melting point than standard solder; typically the melting point is 50 - 70 F 30 - 40 C higher.
Please use a soldering iron with temperature control and adjust it to 20 F 10 C. Exercise care while using higher temperature soldering irons, do not heat the PCB for too long to prevent solder splash or damage to the PCB. The contents of this Parts Manual are subject to change without notice. Published in Japan. Panasonic Digital Document Company and other Panasonic Sales Companies reserve the right to change any information enclosed herein without prior notification.
This includes, but is not limited to, parts pricing, availability, and text. Electrical parts supplied may include previously used components. Important Safety Notice. Components identified by a mark, have special characteristics important for safety.
A damaged cord can cause fire or electric shocks. If the power cord is broken or insulated wires are exposed, contact your Service Provider for a replacement. Using a damaged cord can cause fire or electric shocks. Stop operation immediately if your machine produces smoke, excessive heat, unusual noise, or smell, or if water is spilt onto the machine.
These conditions can cause fire. Immediately switch Off and unplug the machine, and contact your Service Provider.
Do not disconnect or reconnect the machine while it is on. Disconnecting a live connector can deform the plug and cause fire. When disconnecting the machine, grasp the plug instead of the cord. Forcibly pulling on a cord can damage it and cause fire or electric shock. When the machine is not used over an extended period of time, switch it Off and unplug it.
If an unused machine is left connected to a power source for a long period, degraded insulation can cause electric shocks, current leakage or fire. Be sure to switch Off and unplug the machine before accessing the interior of the machine for cleaning, maintenance or fault clearance.
Be sure to switch Off and unplug the machine before accessing the interior of the machine for accessing interface cables, maintenance or fault clearance. Once a month, unplug the machine and check the power cord for the following. If you notice any unusual condition, contact your Service Provider. If lightning strikes in your neighborhood, switch Off the machine. Disconnect the power cord from the machine and reconnect only when the lightning has stopped.
Switch it Off and if the interference disappears, the machine is the cause of the radio interference. Perform the following procedure until the interference is corrected. For an outdoor antenna, ask your local electrician for support. Do not touch areas where these caution labels are attached to, the surface may be very hot and may cause severe burns.
Do not place any liquid container such as a vase or coffee cup on the machine. Spilt water can cause fire or shock hazard. Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts get into the machine, they can short-circuit internal components, and cause fire or electric shocks. If debris metal or liquid gets into the machine, switch Off and unplug the machine. Contact your Service Provider. Operating a debris-contaminated machine can cause fire or electric shock.
A high-voltage component can cause electric shocks. Do not try to alter the machine configuration or modify any parts. An unauthorized modification can. Do not place a magnet near the safety switch of the machine. A magnet can activate the machine accidentally, resulting in injuries. Do not use a highly flammable spray or solvent near the machine.
It can cause fire. When copying a thick document, do not use excessive force to press it against the document glass. The glass may break and cause injuries. Never touch a labelled area found on or near the heat roller. You can get burnt. Quick Guide. For Copy Function. Model No. Table of Contents. Useful Office Functions Multi-Tasking Job Table Operation Chart Problem Solving
0コメント