It provides a quick overview of current settings, along with identification information to help you confirm that you are connected to the correct device. The Overview screen is read only; there are no fields or required entries. Some of the information shown here is the result of your setting on other screens. Free-form description of the IN- tact device. This information comes. System Settings screen to help identify this IN- tact from others.
Each IN- tact should be assigned a unique. This is not normally. Current IP address of the IN- tact The IP address is set on the. The System Settings screen appears:. This screen is used to configure basic information about the IN- tact Entries on this screen also appear on the Overview screen.
Use this field to define the device type IN- tact or its purpose,. Keep in mind that your changes are not written to persistent memory until you click Apply and Restart. The Ethernet Port Settings screen appears:. Use this screen to set basic communication parameters for the Ethernet Port on the IN- tact Only IP version 4 is supported. You cannot permanently save the configuration until you do so.
Unique address of this IN- tact Any changes made on this screen are temporarily saved when you click Advanced to access the second screen. The Ethernet Port Advanced Settings screen appears:. Several additional settings are available by clicking Advanced on the Ethernet Port Settings screen. IN- tact This feature is enabled by default. During keep alive operation, the IN- tact holds an established.
When enabled, the IN- tact sends a keep alive message on each. Note: This inactivity timer may have to be increased beyond the.
The Security Settings screen appears:. This screen is used to set IN- tact security features. It also appears the first time you log in to the device with the default password. If you have already set the password, you can skip this screen and continue with configuration. You can change the IN- tact password whenever necessary. There is one default user name for log in admin and it cannot be changed. There is no default time period for password expiration; the password you set remains valid until it is changed.
It must be at least eight characters. Click Apply to temporarily save your settings. Your changes are immediately written to persistent memory. The new password is in effect the next time you log in to the IN- tact The Web Interface Settings screen appears:. You have the option of restricting access to the IN- tact web server to a specific IP address or range of addresses.
This is useful in preventing unauthorized access attempts on the device from IP addresses outside your normal range of operation. You can also disable or change the value of the timeout feature associated with the web interface.
This is a security feature. By default, the web session automatically expires after five minutes of no activity. The user is logged out. Any changes made to that point are discarded, unless Apply and Restart has been used to commit the changes to persistent memory. However, there may be situations in which you want to disable the timeout completely, or set it to a different value. For example, a direct "always on" connection to the web server, or while working with or configuring the device.
The IN- tact automatically logs you out of the web server interface when you close the browser window. For example, if you browse to other sites while configuring the IN- tact , it may appear that another session is already in progress when you return to the IN- tact 's address. It is important to understand that only one user may be logged in to the IN- tact web server interface at any given time.
User 1 will see a message. The device is capable of hosting two separate SNMP sessions. Use this screen to configure the IP address for each of the sessions. Trap forwarding is optional and can be used independently of SNMP management. Enter the first IP address to which the IN- tact should forward. Enter the second IP address to which the IN- tact should forward.
Click Save and Continue or Apply and Restart as appropriate. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Hypercom User Manual Download for 1. Printed in the United States of America. Acknowledgements This product includes software developed by the University of California, Berkeley and its contributors.
IN- tact Software Configuration Guide iii. Table of Contents Performing a Hex Dump IN- tact Software Configuration Guide v. IN- tact Software Configuration Guide 1. Dial Backup Feature In addition to processing IP transactions, the IN-tact features dial backup capability in the event of ISP or other outage that affects the ability to process transactions via the device's Ethernet port. IN- tact Software Configuration Guide 3.
Operation without an Ethernet Connection Software Information Operation without an Ethernet Connection The IN- tact can be configured to use only the modem with a PPP connection instead of using Ethernet, but an Ethernet connection must initially be available in order to configure the device for this type of operation.
To set up for this type of configuration: 1. IN- tact Software Configuration Guide 5. Software Information Operation without an Ethernet Connection. IN- tact Software Configuration Guide 7. If there is no activity within a four-minute period, the following warning appears: N OTE : If you have multiple applications open, it is possible that the warning may not appear in your foreground and could be hidden behind another window.
If you do not acknowledge it within that time, your session expires and the following message appears: You are now required to log in to the device again. IN- tact Software Configuration Guide 9. Operating System Requirements Windows Service Pack 3 or higher should be installed on the computer being used to configure the IN- tact.
Data Entry - Use of Special Characters In general, do not use the "double-quote" special character like the one surrounding the word in data entry fields.
Internet Browser Recommendations Some browser settings can cause extra system messages to appear and cause other issues. Scroll down the list to locate the Active Scripting option. Configuration Procedure Use this procedure when you are ready to configure the IN- tact To configure the IN- tact 1. The IN- tact responds with the following message: 6. IN- tact Software Configuration Guide Configuring the IN-tact Configuration Procedure This window is displayed by Internet Explorer and allows you to view certificate details and install a certificate on your computer.
Navigation Configuring the IN-tact Navigation The IN- tact configuration navigation tree is easy to understand; its operation is similar to Internet Explorer and other like applications. This number is important because there are several models within the IN- tact product series. This number cannot be changed. Description Free-form description of the IN- tact device. This information comes from the System Settings screen and can be as descriptive as you wish.
Device ID A free-form alphanumeric value up to 32 characters entered on the System Settings screen to help identify this IN- tact from others on your network. This information is entered on the System Settings screen. Configuring the IN-tact Configuration Screens Field Description Contact This can be the name of the administrator, support group, help desk, or other entity to contact for information about this configuration.
This is not normally changed, but can be configured on the Ethernet Port Settings screen. If you need to change this setting, go to the Ethernet Port Settings screen. The System Settings screen appears: This screen is used to configure basic information about the IN- tact Device ID Enter a unique identifier for the device. This is a free-form alphanumeric value of up to 32 characters, including spaces. An entry is required here; you cannot leave the Device ID blank or use only a space as an entry.
Up to characters are accepted. Contact Enter the name of the administrator, support group, help desk, or other entity that can be contacted for information about this configuration. You might want to include a phone number or email address here.
Static Subnet mask Change to match the local IP subnet of your network. The default is The default is 0. During keep alive operation, the IN- tact holds an established connection open for specified amount of time before automatically disconnecting. When enabled, the IN- tact sends a keep alive message on each host connection at intervals set by the keep alive timer. Keep Alive Timer seconds Enter the value in seconds between keep alive messages set to the host.
Five seconds is the minimum, seconds is the maximum. Thirty seconds is the default value. Choose a value between 2KB and 8KB.
The default value is 2KB. Number of Session Retransmits Use the drop-down list to select the number of retransmissions allowed during a session.
The default value is 4 and should not be changed. The default is 15 seconds. The minimum setting is five seconds, the maximum is seconds. Note: This inactivity timer may have to be increased beyond the default setting to allow for larger messages, particularly when slow baud rates are in use. Restrict Source Port Range Use this checkbox to enable or disable restricting the range of source port values for on-demand TCP connections.
By default, source port values range from through Enabling this option restricts the source port values to the range of through Restriction is disabled by default. To change the password: 1. The Web Interface Settings screen appears: You have the option of restricting access to the IN- tact web server to a specific IP address or range of addresses. Subnet Mask Enter the corresponding subnet mask for IP address 1. In order to restrict access to only a single IP address, use a mask of Subnet Mask Enter the corresponding subnet mask for IP address 2.
Expire Inactive Web Sessions Use this checkbox to enable or disable the inactivity timeout feature. This is not a dynamic change; you must Apply and Restart in order for this change to take affect. Inactivity Timeout Set the value in minutes for how long a web session should stay active with no activity.
The default value is 5 minutes. Valid entries are from 5 to 60 minutes. Set the checkbox to enable or disable communication with this SNMP manager. Set the checkbox to enable or disable trap forwarding to this address. You can only view or download manuals with. Sign Up and get 5 for free. Free Equipment including wireless credit card terminals.
Discount rate of 1. Looking for a low cost mobile processing solution? Payment Jack is the answer. Payment Jack is the application to process Visa,Mastercard, and Discover all on your mobile phone.
With features such as real time authorization e mailed receipts, void and online reporting you can trust your business is in good hands.
No additional hardware is needed. This application is fully secure and PCI compliant. We provide the hardware Free of charge along with the free application download. Securely and invisibly holds the device in place. Connect is ideal if you have a mounting solution already in place and would like to upgrade to the FlexiPole system. Hypercom Terminal Guides. Optimum T Equinox T Equinox M Wireless credit card terminals give the business owner the ability to accept credit card sales anywhere and anytime without the need for a phone line or power source.
This newest model is designed for merchants requiring a compact countertop POS terminal accepting all magnetic stripe cards and delivering fast online transaction authorizations.
Manual for T7 PLus Key. Manual for T7 Plus Key. SKU: Category: Hypercom.
0コメント